The interferometer model that meets all your requirements at once is still in development.
In the meantime, we recommend that you uncheck some of the filters.
OCTOPUS 2
handheld robotic interferometer for maintenance inspection of multi-termini fiber optic connectors (MIL-DTL-38999 style and similar) installed inside an aircraft or marine vessel.
Sumix interferometers are designed for inspection of fiber optic ferrules, patch cords, pigtails and bare fiber in the process of polishing and assembly. They enable you to check polishing quality, test connector end face geometry per IEC, Telcordia or your own custom standards and generate reports to supply with your patch cords.
Sumix Interferometers are modern and reliable fiber optic test equipment, featuring USB 3.0 connection technology, high-resolution and high-contrast optics, smart ergonomic fixtures, modern and intuitive software.
Comparison Chart
| WIZ QS-110 | MAX QS+ | MAX QM+ | MAX Quantum | OCTOPUS 2 | |
|---|---|---|---|---|---|
| Optimal for connectors: | Single fiber | Single fiber and MT-RJ |
Single and multi-fiber |
Single and multi-fiber |
MIL-DTL-38999 style and similar |
| List of connectors supported | |||||
| ST, FC, SC (PC, UPC and APC) | |||||
| MU, LC (PC, UPC and APC) | |||||
| E2000 (PC, UPC and APC) | |||||
| MIL-ST (M83522/16, MIL-C-83522) | |||||
| MIL-DTL-38999 | |||||
| M29504/14 (MIL-PRF-29504/14) | |||||
| SMA 905 | |||||
| Duplex SC, LC | |||||
| MT-RJ (PC and APC) | |||||
| MT12 - MT72 (PC and APC) | |||||
| MT16, MT32 (PC and APC) | |||||
| MTP®/MPO (PC and APC) | |||||
| MTP®/MPO (12-72 fiber and 16-32 fiber; PC and APC) with testing guide hole parallelism | |||||
| Cleaved bare fiber | |||||
| Cleaved ribbon | |||||
| Lateral resolution: | 2.5 µm | 1.1 µm | 2.2 µm | 1.47 µm | 3.2 µm |
| Measurement time *: | 1.3 sec | 2 sec (PC) | 3 sec (MT12) 1 sec (single fiber) |
7 sec (MT12), 1.4 sec (single fiber) |
1 min on average for a 6-termini connector |
| Field of view: | 1.2 × 0.9 mm | 1.1 × 0.9 mm | 5.6 × 3.5 mm | 6.0 × 4.4 mm | D = 1.6 mm |
| Measurement mode: | phase shift and white light | phase shift and white light | phase shift and white light | phase shift and white light | white light |
| Anomalies detection: | no | yes | no | yes | yes |
| Microscopy Mode: | no | yes | no | yes | yes |
| Autofocus: | yes | yes | yes | yes | yes |
| Calibration-free fixtures **: | yes | yes | yes | yes | yes |
| Weight: | 3.9 kg (8.6 lbs) |
3.9 kg (8.6 lbs) |
3.8 kg (8.4 lbs) |
4.8 kg (10.6 lbs) | 1.26 kg (2.78 lbs) |
| Dimensions (H×W×L): | 150 × 120 × 90 mm (5.9 × 4.72 × 3.5 inches) |
103 × 137 × 183 mm (4.06 × 5.39 × 7.2 inches) |
103 × 137 × 183 mm (4.06 × 5.39 × 7.2 inches) |
181 × 213 × 117 mm (7.13 × 8.39 × 4.61 inches) |
90 × 118 × 184 mm (3.5 × 4.6 × 7.24 inches) |
| Can be combined with polarity check: | |||||
| Price: | |||||
* Measurement time may vary depending on computer performance and connector end face shape.
** Except for Side+Front View (SVF) and some special fixtures.
E2000 is a trademark of Diamond SA.
MTP is a registered trademark of US Conec Ltd.
CS is a registered trademark of Senko Advanced Components Inc.
Annual Software Maintenance and Support Plan
Purchased with an interferometer
(i) e-mail support for all technical issues relating to the use of the interferometer and the MaxInspect software within one business day of receipt;
(ii) all revisions and updates to the MaxInspect software;
(iii) remote hardware and software demonstration, help desk and video tutorials;
(iv) remote hardware troubleshooting;
(v) providing a loaner unit for the period of repair or calibration (upon availability and if requested).
Extending the Support Plan is optional. If the Support Plan is extended for next year continuously (without a break in support), a 50% discount for the Support Plan applies.